How much does an epoxy basement floor cost?
Basement epoxy starts at about $8 per sq ft, installed, with a minimum job of $1,800. A metallic floor starts at $12 per sq ft. Repairs and moisture treatment are extra.
What is the best flooring for a concrete basement?
It depends on the room and on water. For a laundry, gym, storage or any basement that has been damp, a coating bonded to the concrete is hard to beat, because nothing sits on the slab to trap water. For a bedroom, many people want something softer, such as vinyl plank over a vapor barrier.
Why is my basement floor wet?
Two common reasons. Humid air condenses on cold concrete, or groundwater comes through the slab or the joint at the wall. Wet spots that stay in one place or show up after rain usually mean water is getting in.
Can basement floors sweat?
Yes. In humid weather, warm air meets cold concrete and water forms on top. A dehumidifier and better airflow usually help.
Will epoxy stop water in my basement?
No. A coating cannot stop water pushing up through the concrete, and that pressure can lift the coating off. Fix the water problem first, then coat the floor.
Do I need to seal my basement floor?
Bare concrete sheds dust and soaks up spills. An epoxy coating seals the surface, as long as the slab is dry enough for it to bond. We look at your concrete first.
Do I need to etch a basement floor before epoxy?
We do not use acid. We diamond-grind the concrete so the coating bonds.
Do I need to level a basement floor?
Usually not. Epoxy follows the concrete, and any slope toward a floor drain should stay. We repair cracks as needed.
What is the cheapest basement flooring?
Paint usually costs the least up front, but it is thin and can peel. An epoxy coating costs more and holds up better.
Can I get a metallic floor in my basement?
Yes. Metallic epoxy starts at $12 per sq ft and gives the floor a marble look.